ConOpSys V2970  P004.07
ANVILEX control operating system
Macros
Loopback interface
Collaboration diagram for Loopback interface:

Macros

#define LWIP_HAVE_LOOPIF   (LWIP_NETIF_LOOPBACK && !LWIP_SINGLE_NETIF)
 
#define LWIP_LOOPIF_MULTICAST   0
 
#define LWIP_NETIF_LOOPBACK   0
 
#define LWIP_LOOPBACK_MAX_PBUFS   0
 
#define LWIP_NETIF_LOOPBACK_MULTITHREADING   (!NO_SYS)
 

Detailed Description

Macro Definition Documentation

◆ LWIP_HAVE_LOOPIF

#define LWIP_HAVE_LOOPIF   (LWIP_NETIF_LOOPBACK && !LWIP_SINGLE_NETIF)

LWIP_HAVE_LOOPIF==1: Support loop interface (127.0.0.1). This is only needed when no real netifs are available. If at least one other netif is available, loopback traffic uses this netif.

◆ LWIP_LOOPBACK_MAX_PBUFS

#define LWIP_LOOPBACK_MAX_PBUFS   0

LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback sending for each netif (0 = disabled)

◆ LWIP_LOOPIF_MULTICAST

#define LWIP_LOOPIF_MULTICAST   0

LWIP_LOOPIF_MULTICAST==1: Support multicast/IGMP on loop interface (127.0.0.1).

◆ LWIP_NETIF_LOOPBACK

#define LWIP_NETIF_LOOPBACK   0

LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP address equal to the netif IP address, looping them back up the stack.

◆ LWIP_NETIF_LOOPBACK_MULTITHREADING

#define LWIP_NETIF_LOOPBACK_MULTITHREADING   (!NO_SYS)

LWIP_NETIF_LOOPBACK_MULTITHREADING: Indicates whether threading is enabled in the system, as netifs must change how they behave depending on this setting for the LWIP_NETIF_LOOPBACK option to work. Setting this is needed to avoid reentering non-reentrant functions like tcp_input(). LWIP_NETIF_LOOPBACK_MULTITHREADING==1: Indicates that the user is using a multithreaded environment like tcpip.c. In this case, netif->input() is called directly. LWIP_NETIF_LOOPBACK_MULTITHREADING==0: Indicates a polling (or NO_SYS) setup. The packets are put on a list and netif_poll() must be called in the main application loop.